Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Bikepacking

Salsa Timberjack NX Eagle 27.5+
$1,999.99
The Salsa Timberjack is a hardtail mountain bike that’s equally at home pushing the limits on singletrack or bikepacking to places you’ve yet to discover. Timberjack features modern trail bike geometry, short chainstays for nimble scrambling, and clearance for either 29-inch or plus-size 27.5-inch tires. Timberjack NX Eagle 27.5+ is compact and responsive for great maneuverability. The RockShox Sektor RL fork eliminates chop, so you can confidently explore tough trails, while the SRAM NX Eagle 1x12 drivetrain offers massive gear range and precise shifts. Timberjack’s powerful SRAM Level brakes easily tame that speed when necessary, with precise modulation that sharpens up the control.
Salsa Timberjack NX Eagle 29
$1,999.99
The Salsa Timberjack is a hardtail mountain bike that’s equally at home pushing the limits on singletrack or bikepacking to places you’ve yet to discover. Timberjack features modern trail bike geometry, short chainstays for nimble scrambling, and clearance for either 29-inch or plus-size 27.5-inch tires. Timberjack NX Eagle 29 makes hard trails a heck of a lot easier. The SRAM NX Eagle groupset provides light, intuitive 1x12 gearing, while the RockShox Sektor RL fork works with the 29 x 2.6” rubber to smooth the bumps and provide traction. Timberjack’s powerful SRAM Level brakes easily tame your speed when necessary, with precise modulation that sharpens up the control so you can activate that dropper post and light up the trail.
Surly Bearing Pre-Load Cap Non-Drive Crank Bolt
$6.50
Surly bearing adjust caps for Mr. Whirly and OD
Surly 10/12 Adapter Washer for QR
$15.00
This fine pair of Surly 10/12 Adapter Washers is designed to adapt any 135, 170, or 190mm O.L.D. QR axle hub with a 142, 177 or 197mm spaced thru-axle frame. Make sure the QR axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
Surly Monkey Nuts
$20.00
Whether for derailleur clamp clearance, tire clearance, or personal preference, sometimes it can be advantageous to run the wheel further back in the dropouts. Monkey Nuts install into Surly horizontal dropouts to make spacing the wheel back easy. There are 3 different sets depending on the type of dropout and axle configuration the dropout is intended for. Simply select the correct version of Monkey Nut, install it into the frame, and slam the wheel all the way forward. Bang, done.
Surly O.D. Enduro Bottom Bracket
$65.00
Surly OD Bottom Brackets - Compatible with 24mm spindles - Moonlander BB fits a 100mm bottom bracket shell, but exterior width conforms to BB121 standard
Surly Front Rack
$140.00
Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g
Thule Cadence
$329.95
Whether your day includes a quick trip downtown or a longer bicycle-based adventure, Thule's Cadence is a great way to amp up your family's taste for the open road. Boasting Thule's super-stable ezHitch bicycle attachment for confidence and ease of use, the Cadence comfortably seats two children in padded seats with five-point harnesses. You also get extra storage space for accessories, as well as a visibility-increasing safety flag. When your trip is over, the Coaster folds down quickly and easily for transport and storage.
Topeak DeFender RX
$15.99
Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.
Topeak Aero Wedge Pack (Small w/Strap)
$24.99
Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.
Topeak RideCase II QuickClick Mount
$34.99
Topeak's RideCase II QuickClick Mount lets you attach your RideCase (sold separately) to your bike's handlebar, stem, or stem cap, putting your smartphone front and center. It also allows easy adjustability for portrait or landscape orientation.
Topeak Smartphone Dry Bag
$34.99 - $39.99
Topeak's Smartphone DryBags are a great way to keep your smartphone handy for communication or to use as a GPS during longer rides. This pack features a foam body for protection from bumps and a clear touchscreen-compatible window for viewing your phone's display.
Topeak Aero Wedge Pack (Large w/Strap)
$39.99
Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.
Topeak Explorer Tubular Rack
$44.99
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender, too.
Topeak Explorer Tubular Rack w/Disc Mounts
$49.99
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes with disc brakes, and has a center strip that acts like a short fender, too.
Topeak Omni RideCase DX
$54.99
The DX version of the Omni RideCase holds tight and works with almost every smartphone having a 4.5” to 5.5” screen, with or without a case. High quality, ultra-elastic silicone grippers tenaciously hold your phone for convenient display. The included RideCase Mount rotates for portrait or landscape orientation. The Omni RideCase is compatible with other RideCase QuickClick mounts, like the RideCase CarMount or RideCase Armband. - Material: Ultra-elastic silicone/engineering grade plastic - Added Features: Angle adjustable Rotates for landscape or portrait viewing - Included mounts compatible with Topeak RideCase & PanoComp X - Mount: Included mounts for installation on handlebar, stem or stem cap - Weight: 26 grams - Size: 13.1 x 6.9 x 1.7 cm / 5.2” x 2.7” x 0.7” (Case)
Topeak Compact Handlebar Bag
$59.99
Topeak's Compact Handlebar Bag holds plenty of gear for on-the-bike use and it converts into a fanny pack when you're off the bike. It's great for anything you want to keep close at hand. It features a divided main compartment to keep your gear organized. Plus, the Compact comes equipped with Teflon coating and a full rain cover for when conditions are less than ideal.
Topeak MTX BeamRack
$59.99
Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
Topeak RideCase w/Mount (iPhone 6 and 6 Plus)
$59.99
Topeak's RideCase and mount lets you use your iPhone 6 or 6 Plus as a cycling computer, as a GPS navigating device, to listen to music, and so much more while you're cruising the open road. The RideCase has a separate protective composite fiber panel which integrates with the high-grade engineering plastic exoskeleton to securely hold your iPhone while on the go. An integrated flipstand allows comfortable viewing in landscape or portrait orientation when you're off the bike. Its unique and full angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds.
Topeak RideCase w/Mount (iPhone 6 and 7)
$59.99
Works with iPhone 6/6s/7/8. Clip in your iPhone to use as a cycling computer with apps, including the Topeak Panobike app, use it to navigate as a GPS device, listen to music, and much more while riding. The RideCase has a separate protective composite fiber panel which integrates with the high-grade engineering plastic exoskeleton to securely hold your iPhone while on the go. Its unique and full angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. - Material: Engineering grade plastic frame with composite fiber base plate / Machined aluminum - Added Features: Integrated flipstand for landscape or portrait viewing/Angle adjustable rotates for landscape or portrait viewing/Included mounts compatible with Topeak PanoComputer - Mount: Included mounts for installation on handlebar, stem or stem cap - Size: 14.1 x 7 x 1.6 cm / 5.6” x 2.8” x 0.6” - Weight: 27 grams
Topeak MTX TrunkBag EX
$69.99
MTX QuickTrack compatible TrunkBag featuring a divided main compartment constructed with Topeak's unique process of combining rigid panels and flexible fabric for structure and water repellency. Features two mesh side compartments for extra capacity and rear water bottle holder lets you carry more water on extended trips. - Attachments: 1 divided main compartment, two mesh side pockets - Capacity: 8L / 480 ci - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 35 x 21 x 19 cm / 14.2” x 8.3” x 7.5” - Weight: 870 g / 1.92 lb
Topeak DynaPack
$74.99
Perfect for those that occasionally need a little extra carrying capacity than a seat bag, Topeak's DynaPack has a sleek, aero profile and quickly attaches to your seatpost. It easily holds tools and tubes with enough room to spare for a jacket or a small picnic lunch.
Topeak TourGuide Handlebar Bag DX
$89.99
Topeak's TourGuide Handlebar Bag DX is perfect for day trips, commuting and any other use you can think of. It features a divided main compartment, a front zip pocket, a top pocket and a clear map pocket that's positioned perfectly for easy viewing. The padded shoulder strap makes it easy to carry this sweet bag, and Topeak's mounts make it a snap to attach the bag to your bars. Plus, the TourGuide comes equipped with a reflective stripe as well as a full rain cover for when conditions are less than ideal.
Topeak MTX TrunkBag EXP
$99.99
Large capacity MTX TrunkBag containing one main divided compartment with two expandable pannier side panels and rear water bottle holder. Topeak's unique construction process provides rigidity and water repellency. Compatible with all MTX QuickTrack racks with attached side frames. MTX Dual Side Frames are required when using side panniers on MTX BeamRacks. - Attachments 1 Divided main compartment, two side pockets with expandable panniers - Capacity: 16.6 L / 1010 ci - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 36 x 25 x 21.5 cm / 14.2” x 9.8” x 8.5” - Weight: 1195 g / 2.63 lb
Topeak MTX TrunkBag DXP
$124.99
Topeak's MTX TrunkBag DXP boasts a pop-up main compartment and expandable side panniers so it's capable of carrying plenty of gear. Plus it's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, bottle holder, taillight clip and top elastic straps. There are even reflective strips for safety. And, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately).
Topeak JoeBlow Booster
$159.99
Half air compressor – Half pump. The JoeBlow Booster pump just made it easier to install tubeless tires. This pump has an integrated aluminum air chamber that stores an air charge of one liter, up to 160psi / 11 bar, to quickly fill your tire and ensure the proper installation on a tubeless rim, just like a shop compressor. Once you flip the selector from “Charge” to “Inflate” mode, air bypasses the chamber and flows directly into your tire like a standard pump. The top-mounted easy to read gauge, air release button and comfortable dual density polymer grip, combined with its extra-long hose and stable base makes mounting tubeless and standard tires a breeze! - Hose dock - Base: Steel - Handle: Oversize padded / Dual density polymer - Pressure Tuning: Air release button - Barrel: Anodized aluminum w/ large cylindrical aluminum chamber - Gauge: 160 psi / 11 bar - Top mount analog - Head: SmartHead DX3 w/ air release button & x-long hose - Weight: 2.9 kg / 6.4 lb - Size: 74 x 25 x 18.5 cm / 29.1” x 9.8” x 7.3”
Velo Orange Tourist Handlebar
$34.99
Velo Orange's Tourist bar is a "North Road" style bar rendered in polished aluminum alloy. It's similar to the bars used on many classic British roadsters. The clamp area is 25.4mm in diameter. The width is 570mm and the reach is 180mm; it has about 70mm of rise. They sweep back about 60-degrees, and the grip area is about 160mm long. The Tourist accepts regular MTB (22.2mm) grips, brakes, and shifters, but not inverse levers or bar-end shifters.
Previous page Page 2 of 2