Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Miscellaneous

• Low profile, easy attachment to framesfeaturing an Si dropout • Full adjustable length for range of frame sizes • Lightweight aluminum construction
The Puget lever kits are compatible with all of our droppers, including the Cascade, Pine, Rainier, Bachelor, and Coast. These levers use a barrel nut for securing the cable and is universal with all mechanically actuated droppers from other brands. This kit includes the lever assembly, cables, housing, and barrel nut. - 1x Lever - Designed to be used with bikes using a single front chain ring, this is a "shifter style" lever. The lever contains a sealed bearing, has a standard band clamp handlebar mount and is also SRAM MatchMaker X compatible.
You asked for it, we made it. Our Roadie Bar Lever Kit is designed to mount in the drops of your road drop style handlebars, turning your Cyclocross or Gravel bike into the ultimate rig. Whether getting the saddle out of your way during descents in your local CX race series or providing a little needed relief during a long gravel road ride, we now have the answer for you. Included in the kit: - Cascade/Pine lever with 24mm diameter for road bars - Cables & Housing - Barrel nut for Rainier post - Rotary ferrule for easy adjustments
Designed to replace your lower shift lever for SRAM X01 and XX1 shifters, this lever is adjustable and gets you rocking the matchy-match cockpit. Made with the Loam Lever's "yoga pad for your thumb," this guy is that extra bit of style to make you smile each time you hop on your bike. - Weight 16g (SRAM X01 lever is 13g) - Shifty Lever is to replace SRAM's lower Pull Lever only
The Problem Solvers Cantilever Studs screw into the bosses built into bicycle frames to provide the proper mounting studs for brakes. Each brake requires two studs.
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts
When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.
- Use: Brake - Length: 30mm - Diameter: 5mm
- Use: S.I.S. - Length: 30mm
- Steel cups - Steel retainer bearings - Available in chrome or black - S.H.I.S.: EC32/25.4-24tpi|EC32/27 - Steerer Dia: 25.4mm - Cup Dia: 32.5mm
- w/Nut - 1-3/4-inch
- Rubber - Color: Black
Surly Stainless Steel Track Lockring. - Fits all but Campagnolo, Miche or Phil Wood - 5mm thick with 0.65mm lip for maximum thread and lockring wrench contact
$0.10
- Standard metric-sized Stainless steel washers - 100 per tub
$1.49
Origin-8's 1 1/8-inch Headset Spacers are made of lightweight and durable aluminum and come in 2mm, 5mm or 10mm thicknesses and lots of cool colors to add style to your ride. You get a bag of 10 spacers.
$1.99
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$1.99
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
$1.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$2.99
The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables. - Fits all Greenfield kickstands and most generics - Made in the USA
$2.99
- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack
$2.99
• With bolt & nut • 1 1/8-inch = 28.6mm • 1-inch = 25.4mm
$3.40
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl
$3.99
- Sold in pairs. - Allen wrench included.
$3.99
- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No
$4.00
RaceFace Aeffect R Dropper Post Small Parts
$4.50
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$5.00
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
$5.00
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
Page 1 of 6 Next page