Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Miscellaneous

Shimano 12-Speed Chain Quick Link
$13.99
- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use
SRAM PowerLock Chain Connector
$4.99
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
SRAM PowerLock Eagle Chain Connector 12-Speed
$4.49
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
Cannondale Si Kickstand
$24.00
• Low profile, easy attachment to framesfeaturing an Si dropout • Full adjustable length for range of frame sizes • Lightweight aluminum construction
RockShox XLoc Banjo Hose Barb Kit
$30.99
RockShox XLoc Remote Parts - Includes retaining ring, banjo o-rings, and hose barb o-ring
KMC Half Link Adapter
$1.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Cane Creek 40 Series Integrated Headset (Italian)
$51.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
KMC MissingLink 7.3mm Chain Connector
$2.00
- Compatible with Shimano HG40/50/70/90 chains - KMC Z50, Z7, Z8, X8.93, X8.99 chains - Reusable - No Tool Required - Pin Length: 7.3 mm
Wheels Manufacturing Inc. Derailleur Hanger 256
$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Jamis #65-0001 - (1) M8 Chainring bolt included
Surly Bearing Pre-Load Cap Non-Drive Crank Bolt
$6.50
Surly bearing adjust caps for Mr. Whirly and OD
Wheels Manufacturing Inc. Derailleur Hanger 298
$41.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x8 socket head screw included
Wheels Manufacturing Inc. Derailleur Hanger 22
$31.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M4x10 Flat Head Screw Note: This hanger has a pin machined in to it that inserts in to the frame (refer to photos).
Wheels Manufacturing Inc. Derailleur Hanger 120
$31.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Note: The mounting holes on Wheels Mfg DROPOUT-120 are 18mm apart, center-to-center. Do not confuse this hanger with DROPOUT-138.
Salsa Alternator 2.0 Dropout Right Plate
$29.99
Alternator 2.0 is the latest iteration of Salsa's adjustable dropout system. Alternator 2.0 Dropouts are a modular system consisting of replaceable dropout plates and fixing hardware. They are specifically designed for, and only compatible with, Salsa frames using the 2.0 system. - Alternator 2.0 Dropout plates are compatible with frames featuring 142, 148, 177, or 197mm spacing - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame - Allows for the rear axle location to be adjusted through a ~17mm range relative to the bottom bracket axle - Note: This part number only includes a single Alternator 2.0 plate
Sunlite Steel 1-inch–21.1mm Threaded Headset
- Steel cups - Steel retainer bearings - Available in chrome or black - S.H.I.S.: EC32/25.4-24tpi|EC32/27 - Steerer Dia: 25.4mm - Cup Dia: 32.5mm
Sunlite Stem Binder Bolt
- w/Nut - 1-3/4-inch
Wheels Manufacturing Inc. BB30 Angular Contact Bearing & Clip Kit
$38.99
BB30 service kit includes (2) Enduro 6806 ABEC-5 Angular Contact sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems
Wheels Manufacturing Inc. Derailleur Hanger 303
$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M3x10 Socket Head Screw Included - For 12x1.0 Thru Axle - Replaces Cannondale Part #KP419
SRAM Stealthamajig Hydraulic Disc Brake Hose Fitting Kit
$7.99
Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
Wheels Manufacturing Inc. Derailleur Hanger 65
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (Long - Bolt Only)
Wheels Manufacturing Inc. Derailleur Hanger 169
$34.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M4x12 Flat Head Screw, (1) M4x12 Socket Head Screw
TerraTrike 20-inch Deluxe Rear Fender
$59.95
In foul weather conditions this rear fender protects you from dirt and water splatter and thus the ever common "trike stripe" up the back of your neck and head. The Deluxe Fenders are solid and stable so you won't get annoying vibrations or tire rubs from wind or rough roads. The black coloring with gray stripe and rear mud spoiler adds to your trike's sporty look. Pair with the front fenders for that completely splatter free ride. Compatible with all current TerraTrike models. Not compatible with TerraTrike versions 3.5 and older. - Deluxe rear fender set for 20" (406) wheel - Robust design for years of reliable use - Contains one rear fender, mounting hardware and instructions - Black and silver fender with black hardware
Wheels Manufacturing Inc. Derailleur Hanger 158
$34.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x4 Socket Head Screws
Shimano 7- and 8-Speed Chain Pins
$8.00
- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack
TerraTrike Chain Gobbler 2
$79.99
Why sacrifice comfort and performance when a TerraTrike is shared amongst multiple riders? Use the Chain Gobbler 2 to adjust your trikes boom length to the perfect fit within seconds and without tools. This kit includes brackets, chain idlers, quick-release levers, and all other hardware needed. - Easily takes up or pays out chain - Allows for boom adjustment anywhere from large to small - Fits all Rambler and GT models
Problem Solvers Seatpost Shim
$7.99 - $10.00
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
Wheels Manufacturing Inc. Derailleur Hanger 162
$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Screws
Profile Design Airstryke II
$171.00
The Airstryke II takes the features of the ever popular Airstryke and adds an expanded fit range and more comfortable armrest. The flip up bracket and classic shape are retained. Performance The Airstryke II is intended to allow riders to add aerobars to their road or adventure bike without sacrificing the ability to hold the bars close to the stem. The comfortable grip angle and smoothly curved armrest offer a relaxed position for long days in the saddle. Fit Data - Armrest Offset: -85mm to 17.5mm in 7.5mm steps - Armrest Width: 131mm to 298mm in 18.5mm steps - Armrest Stack: 40mm Origin As one of the most popular model in the history of aerobars it seemed appropriate to update the much loved Airstryke with our new generation fit range and comfort focused armrest. We didn't want to change the elements that have made the bar so successful and the changes made just enhance the adjustability and comfort. - Bracket: L2 Flip-Up - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo Armrest - Armrest Stack: 40mm - Reach: -85mm to 17.5mm in 7.5mm steps - Extension Adjustment: 150mm (center of basebar - end) - Armrest Width: 155mm - 203mm - Weight: 592g
Wheels Manufacturing Inc. Aluminum Headset Spacer
$1.99 - $6.99
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
Wheels Manufacturing Inc. Derailleur Hanger 19
$29.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Page 1 of 5 Next page