Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Miscellaneous

SRAM X01 Eagle Pulleys and Inner Cage
$79.99
Original equipment rear derailleur pulleys and inner cage for SRAM X01 Eagle rear derailleurs.
TerraTrike Chain Gobbler 2
$79.99
Why sacrifice comfort and performance when a TerraTrike is shared amongst multiple riders? Use the Chain Gobbler 2 to adjust your trikes boom length to the perfect fit within seconds and without tools. This kit includes brackets, chain idlers, quick release levers and all other hardware needed. - Easily takes up or pays out chain - Allows for boom adjustment anywhere from large to small - Fits all Rambler and GT models
TerraTrike 24-inch Deluxe Rear Fender
$69.99
- Deluxe rear fender for 24" (507) wheels. - Robust design for years of reliable use - Contains one rear fender, mounting hardware and instructions - Black and silver fender with black hardware - Only works with 24" rear wheels, tire size up to 2" - Not applicable with Sportster Model
TerraTrike 26-inch Deluxe Rear Fender
$69.99
In foul weather conditions this rear fender protects you from dirt and water splatter and thus the ever common "trike stripe" up the back of your neck and head. Pair this with the matching front fenders for a completely spray free ride. The Deluxe Fenders are solid and stable so you won't get annoying vibrations or tire rubs from wind or rough roads. The black coloring with gray stripe and rear mud spoiler adds to your trike's sporty look. Pair with the front fenders for a completely splatter free ride. Compatible with all current TerraTrike models equipped with a 26" rear wheel. Not compatible with TerraTrike versions 3.5 and older. - Deluxe rear fender for 26" (559) wheels - Robust design for years of reliable use - Contains one rear fender, mounting hardware and instructions - Black and silver fender with black hardware
FSA Orbit C-CX
$64.99
FSA's core line of headsets with built-in cable hanger for cyclocross applications. - Bearing Type: Cartridge - Weight: 93g - Crown Race: 30 - S.H.I.S Lower: IS42 - S.H.I.S Upper: IS42 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
Cane Creek 40 Series Integrated Headset (Italian)
$51.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
Cane Creek Hellbender Headset Bearing
$23.99 - $48.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
TerraTrike Comfort Pedal Conversion Kit
$44.99
The TerraTrike Comfort Pedal Conversion Kit is a great safety addition for your trike. Providing a comfortable foot support solution, they also allow for hands free entry. Specifically designed for recumbent trikes they are easily adjustable. One pair is included in the kit. Pedals not included - mounts to standard TerraTrike pedals. One size fits most. - Convert standard pedals to pedals with heel support straps - Securely holds heel of foot when going over bumps - Fits TerraTrike and many other standard pedals - Easy sizing with straps
Dimension Steerer Extender
$35.99 - $43.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
Cane Creek 40 EC44 Conversion Headset Bottom
$42.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: EC44/40/H12/K • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.00mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 65g
Wheels Manufacturing Inc. Derailleur Hanger 298
$41.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x8 socket head screw included
Wheels Manufacturing Inc. Derailleur Hanger 162
$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 256
$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Jamis #65-0001 - (1) M8 Chainring bolt included
Wheels Manufacturing Inc. Derailleur Hanger 293
$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Fastener is not included - Replaces Cannondale Part # E123007-2 R3 (KP432) - For DT Swiss Thru Axle Not the same as DROPOUT-295. Check for correct thru axle fit.
Wheels Manufacturing Inc. Derailleur Hanger 303
$39.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M3x10 Socket Head Screw Included - For 12x1.0 Thru Axle - Replaces Cannondale Part #KP419
Wheels Manufacturing Inc. Derailleur Hanger 325
$39.99
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Giant Hanger #RE270A - For standard mount derailleurs - Attaches to frame with (2) M4x14 flat head screws (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 326
$39.99
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Giant Hanger #RE270 - For Shimano Direct Mount derailleurs - Attaches to frame with (2) M4x14 flat head screws (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. BB30 Angular Contact Bearing & Clip Kit
$38.99
BB30 service kit includes (2) Enduro 6806 ABEC-5 Angular Contact sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems
Wheels Manufacturing Inc. Derailleur Hanger 217
$37.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 308
$37.99
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Attaches to frame with either (1) M4x12 or M4x16 Socket Head Screw - Fasteners not Included - For 12x142 and 12x148 Thru Axle - Replaces Niner Part #28-013-13-00-20
Salsa Flip-Lock Seat Clamp
$36.99
Need a hand-friendly quick-release with some major bling? Then Salsa's Flip-Lock Seat Clamps are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette. - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - Integrated Flip-Off lever - 30.0 clamp for most Salsa steel frames - 30.6 clamp for most Salsa Scandium frames - For smooth operation, lightly grease the bolt threads and keep all parts clean
Wheels Manufacturing Inc. Derailleur Hanger 158
$34.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x4 Socket Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 167
$34.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - For carbon frames, use (2) M3x8 Flat head screws - For all non-carbon frames, use (2) M3x10 Flat head screws
Wheels Manufacturing Inc. Derailleur Hanger 169
$34.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M4x12 Flat Head Screw, (1) M4x12 Socket Head Screw
Wheels Manufacturing Inc. Derailleur Hanger 269
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M3x8 Flat head screws included - Cannondale Hanger #KP284
Salsa Rack-Lock Seat Collar
$31.99
Rack-Locks keep your seatpost in place and provide a mounting position for the front struts of a rack. - 34mm-wide rack mount threaded for M5 bolts - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - For smooth operation, lightly grease the bolt threads
Wheels Manufacturing Inc. Derailleur Hanger 120
$31.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Note: The mounting holes on Wheels Mfg DROPOUT-120 are 18mm apart, center-to-center. Do not confuse this hanger with DROPOUT-138.
Wheels Manufacturing Inc. Derailleur Hanger 157
$31.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 22
$31.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M4x10 Flat Head Screw Note: This hanger has a pin machined in to it that inserts in to the frame (refer to photos).
Wheels Manufacturing Inc. Derailleur Hanger 47
$31.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Page 1 of 5 Next page